All-Track has been building tracked vehicles for over 44 years. Today All-Track offers four different models of tracked, all-terrain carriers to choose from, ranging in size as follows:
THE ONE TON CAPACITY AT2000
The AT-2000 is a compact tracked vehicle that is small on size, and big in versatility. At only five feet wide, and capable of zero radius turns, it fits in areas that other tracked and wheeled all-terrain vehicles fail to reach. This machine is built to the same heavy-duty standards that all of our vehicles are built to and is made to last. With a 65hp Cat diesel and full hydrostatic drive, the machine requires very little maintenance as there are no chains or tires to go flat, and no clutches or belts to be adjusted. The ALL-TRACK AT-2000 is large enough to handle 2,500Lb. loads. It comes with a heated cab, is easy to maintain and has a low environmental impact.Engine: Caterpillar C2.2 rated at 65hp.
Weight: 4,750 lbs/2,159kg
Length: 12 feet/3.65 meters
Ground Pressure: 2.2 psi
Max Gradient: side: 40%, front: 60% Model 2000
AT2000 features & specifications
THE AT-30HD, 2.5 TON CAPACITY
The Hydrostatic drive AT-30HD is a multi-function tracked vehicle suitable to perform many tasks in any kind of terrain condition. It is available with a single or two passenger cab and large deck space, or as a tracked personnel carrier. With a reliable hydrostatic transmission and powerful John Deere 99hp Turbo Diesel, the AT-30HD will get you where you need to be, when you need to be there. The AT-30HD is easily transported behind any one ton pickup making it the ideal rapid response unit for remote environmental, disaster, and emergency work. Its 5000lb. payload capacity also makes it ideal for pipeline maintenance work, forest fire fighting, drill support, and as a lightweight all-terrain drill carrier. Engine: John Deere Tier 3 5030H rated @ 99HP
Deck size: 76" wide x96" long
Deck height: 35" from ground
Steering: Single Ergonomic Joystick
Tracks: steel cleats on rubber belts
Ground Pressure 22" wide - 2.0 psi loaded
Ground Pressure 31" wide -1.5 psi loaded.
Weights: 8500# basic vehicle - 4500# payload
The All-Track AT-80HD is a rugged, dependable, and robust tracked all-terrain carrier. With features like a heavy duty walking beam suspension and powerful hydrostatic drive system, the AT-80HD suits virtually any industry where remote access is crucial. The heavy-duty construction and 14,000lb. payload make this the ideal tracked vehicle for medium sized exploration and diamond drilling drills, as well as a excellent support vehicle for inaccessible and remote work sites. The AT-80HD tracked carrier can easily be equipped with any truck mounted equipment such as stiff or knuckle-boom cranes, digger derricks, aerial lifts, water or fuel tanks, vacuum units, and spray units for tailing pond dust control. Its low ground pressure tracks allow it to easily operate in deep mud, snow, rock, muskeg and steep inclines where wheeled equipment fails.Pump Drive: Funk Dual Pad Pump Drive
Drive System: Linde variable displacement pumps, Poclain single speed HTLS wheel motors
Running Gear: H.D. Walking Beams, on sealed spindles and bearings, oil bath hubs, 650-16 solid tires, 33" wide, rubber belts with steel crosslinks
Weights: 14,000 Lbs. Tare, 14,000 Lbs. payload, 28,000 Lbs. G.V.W.
It is a high capacity tracked vehicle with low ground pressure and rubber torsion suspension. It is available with cab forward or cab over design. The ALL-TRACK AT-150 is large enough to handle 20,000Lbs. loads, yet it is able to be transported in a C-130 aircraft without removing the tracks.Engine: Choice of John Deere or Cummins, turbo or naturally aspirated, 4 or 6 cylinder
Transmission: Allison MT-643 automatic transmission - 1480 series drive-line
Final Drive: M-24 Differential controlled cross drive and planetaries. Air controlled steering bands, Spring applied parking brakes.
Running Gear: 5 ply rubber track belts; 40" steel grouser bars, 750x20 tires, oil bath hubs, rubber torsion suspension axles.
Weights: 22,000 Lbs. Tare, 20,000 Lbs. payload, 42,000 Lbs. G.V.W. Model AT-150
Please Note: All vehicle specifications are based on a standard machine, but please bear in mind that All-Track Service can easily adapt any unit for your specific requirements. (i.e. power package, deck size, cab size, etc...) Please contact us to discuss the machine we can build for you! Please proceed to the products page for information on each.
